gräfix 66 KF
Lime finish
CS I · Fine-finish interior plaster – without added cement, in powder form
gräfix 66 KF is based on white hydrated lime and marble powder and contains no plastic or synthetic resin components. This vapour-permeable lime finish has excellent sorption properties and can absorb and release moisture. This enables it to help regulate moisture levels on the wall surface.
gräfix 66 KF is suitable for smoothing finely trowelled lime base coats to a thickness of up to 3 mm.
Supplied in: 10 kg buckets
- Standard plaster mortar in accordance with DIN EN 998-1
- Compressive strength CS I
- Vapour resistance μ 6–9
- Grain size 0–0.3 mm marble powder
- Working time approx. 3 hours
- Supplied in 10 kg buckets
- fine, cement-free lime-based skim coat
- free from plastic or synthetic resin components
- containing white hydrated lime and marble powder
- vapour-permeable with a vapour resistance of μ 6–9
- highly alkaline
- free from plasticisers
- free from biocides
- free from preservatives
- the high pH value can create conditions on the surface that inhibit the growth of mould
- very good sorption properties
- with air lime as a binder
- Can be applied by hand or with a rendering machine
- Excellent machine workability
- Supports moisture regulation on the wall surface thanks to its sorption properties
- suitable for vapour-permeable mineral interior wall surfaces
- For smooth finishing of thin-layer lime plasters
- For repairing and restoring cornices, ornaments and sculptures
- Suitable for freehand work and glossy trowelling techniques
- Pre-wet the substrate with a fine spray
- For smooth and non-absorbent substrates, apply a primer coat of gräfix 66 HP first
- Mix one bucket of gräfix 66 KF with approx. 7 litres of water
- Plaster thickness: max. 3.0 mm
- Coverage: approx. 1–2 kg/m²
- Coverage: at 1.0 mm, approx. 10 m² per bucket
- Please refer to the technical data sheet!
- Technical Data Sheet ► (DE) - (EN)
- Safety Data Sheet ► (DE)
- Brochure: ‘Lime plaster: age-old yet cutting-edge’
- Brochure “Heritage Conservation, Preserving Value”
gräfix Kalklinie elegance
Mineral wall finishes: slurry lime fillers as a mainstay of building biology
Fine mineral surfaces are all the rage – which is why thin-coat lime putty is becoming increasingly important in both new-build and renovation projects for residential properties.
Slaked lime plaster combines design possibilities with properties relevant to building biology and building physics. It is free from synthetic solvents, vapour-permeable and, thanks to its open-porous structure, can absorb and release moisture.
Even when applied in a fine, thin layer, the lime putty surface can thus help regulate moisture levels on the wall surface. The naturally high pH value of the lime putty creates conditions on the surface that can inhibit the growth of mould.
Trust through transparency
Our gräfix slaked lime filler is based on a purely mineral formulation. It combines the characteristic properties of slaked lime with a wide range of options for mineral surface finishes.
