Structural work

M 5 · Window sill laying mortar · 10–60 mm mortar bed thickness

Factory-made dry mortar based on lime with limestone sand 0 - 1.6 mm; the mortar contains no chemical additives and is therefore particularly suitable for organic construction. As air lime is used as a binding agent, longer setting times must be…

Lime-cement masonry mortar of mortar group M 5 - for basements and multi-storey masonry - grain size 0 - 1.6 mm

Pre-masonry mortar for non-absorbent bricks, e.g. hard firing bricks, clinker bricks - suppresses lime efflorescence - grain size 0 - 1.6 mm

Cement masonry mortar - with high compressive and flexural strength - for heavy-duty masonry - grain size 0 - 1.6 mm

Trass-lime masonry mortar - for laying and grouting natural stone - suppresses lime efflorescence - grain size 0 - 1.6 mm

Trass-cement mortar - for grouting natural stone masonry and laying natural stone slabs - suppresses lime efflorescence - grain size 0 - 1.6 mm

Trass-cement mortar - for bricklaying and laying natural stone - with coarse grain for greater layer thickness and increased stability - for heavy stones - grain size 0 - 4.0 mm

Lightweight masonry mortar LM 36 - for masonry of thermally insulating wall-building materials - with mineral lightweight aggregates - grain size 0 - 2.5 mm

LM 21 lightweight masonry mortar - for laying highly thermally insulating lightweight building blocks - with mineral lightweight aggregates - grain size 0 - 2.5 mm

Soil stabilisation with gräfix CalCem - existing soils do not need to be replaced with gräfix CalCem, they are stabilised and frost-resistant

Chippings for concrete and asphalt, double crushed - grain size 16/22

Chippings for concrete and asphalt, double crushed - grain size 4/8

Chippings for concrete and asphalt, double crushed - grain size 8/16

Mineral concrete: frost-proof substructure for roads, paving, footpaths, hall construction

Crushed limestone sand - grain size 0 - 0.8 mm - 0.8 - 1.6 mm - 1.6 - 4.0 mm