Mineral-based decorative plaster
gräfix 601
Scratch coat quartz
CR CS II - expressive, classic scratch coat plaster
The purely mineral, thick-layered, classic scratch coat is applied and scratched back. It offers very good protection against driving rain and is highly resistant without hindering water vapour diffusion. A wide range of colours can be found in the gräfix colour chart. The scratch coat can also be given an effective finish with a mica additive.
Delivery: 35 kg bag
Grain size: 3.0 mm
Yield: approx. 1.9 m²/bag
- Normal plaster mortar according to DIN EN 998-1
- Mortar group: CR CS II
- Classic scratch plaster for scraping with a hedgehog
- Grain size 0 - 3.0 mm quartz grains
- Original scratch coat texture
- Supplied in a 35 kg paper sack
- Processing time: approx. 2 hours
- Standard colour: white
- Not suitable for ETICS
- Very calcareous, mineral plaster
- Can be applied by hand and with a plastering machine
- Open to water vapour diffusion
- Water-repellent
- Indoors and outdoors
- For walls and ceilings
- Colouring with lightfast colour pigments
- Remove coatings that restrict adhesion
- Pre-wet the substrate/masonry accordingly
- Roughened, set base plasters serve as substrates
- gräfix 63 SB is required as a bonding agent for smooth substrates
- Mix one bag of gräfix 601 with approx. 8 litres of water
- Apply by hand or with a plastering machine and finishing mixer
- Plaster thickness: 15 mm
- Use a notched trowel to create a flat, closed surface
- Finishing: best with a so-called Swiss trowel
- Scraping: create texture with a nailing board (plastering trowel)
- Yield: approx. 1.9 m² per bag/35 kg
