Lime-cement plaster
gräfix 64
Universal renovation plaster
CS II - Thin-layer plaster
Very good adhesion thin-layer plaster on a lime-cement base with limestone crushed sand and processing-enhancing additives for felted surfaces and as a substrate leveller on older fine plasters. The fibre-reinforced renovation plaster adheres very well to mineral and dispersion-bound surfaces. Finally, a protective coat or thin-layer plaster is required for free design.
Delivery: 25 kg bag
Grain size: 0 - 0.8 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0 - 0.8 mm crushed limestone sand
- approx. 21 litres of fresh mortar
- approx. 840 litres/to
- Processing time approx. 1.5 - 2 hours
- Delivery in 25 kg paper bag
- 48 bags per pallet/1.2 tonnes
- Very economical lime-cement plaster thin-layer plaster
- Can be applied by hand or with a plastering machine
- Very good machinability due to processing-enhancing additives
- Elastic, fibre-reinforced and very good adhesion
- Can be used indoors and outdoors and in damp rooms
- ideal for reworking old decorative plaster surfaces
- can be used as a finishing coat with a very attractive felt texture or free texture
- also ideal for renovation
- Remove coatings that restrict adhesion
- Roughen and clean old, dispersion-bound substrates (plaster or paint)
- Pre-wet the substrate/masonry accordingly
- Apply with a stainless steel trowel without any build-up
- Felt or structure/design freely at the right time
- Mix one bag of gräfix 64 with approx. 7 litres of water
- Plaster thickness: 3 to 5 mm, depending on use
- Yield: with 4 mm plaster thickness approx. 210 m² per tonne
