Renovation plaster system
gräfix 95
Renovation base plaster according to WTA data sheet 2-9-04/D
CS II - according to WTA data sheet 2-9-04/D
Machine-applied, mineral restoration base render based on HS na cement, hydrated white lime, limestone crushed sand and tempering additives, with the typical restoration render components with high strength, water vapour permeability, air void content and water-repellent effect - ideally matched to gräfix 92 restoration render. Used in thicker structures as a base coat and salt reservoir under gräfix 92 for heavily salt-stressed masonry.
Delivery: 30 kg bag
Grain size: 0 - 1.6 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0 - 1.6 mm crushed limestone sand
- approx. 26 litres of fresh mortar
- approx. 860 litres/to
- Processing time approx. 2 hours
- Delivery in 30 kg paper bag
- 40 bags per pallet/1.2 tonnes
- Ideal base plaster for levelling gräfix restoration plaster system
- Can be used indoors and outdoors
- good adhesion with high compressive and flexural strength
- high sulphate resistance due to HS/NA cement
- low alkali content
- Remove damaged surface up to at least 1 m above the damaged zone
- Apply by hand or with a plastering machine
- Pre-wet the substrate/masonry accordingly
- Mix one bag of gräfix 95 with approx. 7.5 litres of water
- Mix thoroughly for 5 minutes
- Plaster thickness: up to 20 mm, depending on use
- Yield: with 20 mm plaster thickness approx. 43 m² per tonne
