Lightweight lime-cement plaster
gräfix 72 FL
Fibre lightweight base render
CS II - fibre-reinforced with polystyrene
... and water-repellent, adhesion and workability-enhancing additives for a particularly light, diffusion-open base render. Due to the reduced modulus of elasticity and the optimised use of fibres, the lightweight fibre plaster is highly resistant to cracking. For use on normal to highly insulating masonry in exterior and interior areas.
Delivery: 30 kg bag
Loose goods in site silo
Grain size: 0 - 2.0 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0 - 2.0 mm crushed limestone sand
- approx. 33 litres of fresh mortar
- approx. 1100 litres/to
- Processing time approx. 2 - 3 hours
- Delivery in 30 kg paper bag
- 40 bags per pallet/1.2 tonnes
- Very economical lime-cement lightweight base render with EPS
- fibre-reinforced lightweight base render for wall building materials λR > 0.09 W/(m-K) without fabric
- Can be applied by hand and with a plastering machine
- Very good machinability due to processing-enhancing additives
- Can be used indoors and outdoors and in damp rooms
- Remove coatings that restrict adhesion
- Pre-wet the substrate/masonry accordingly
- gräfix 63 SB is required as a bonding agent for smooth substrates
- for wall building materials λR ≤ 0.09 W/(m-K) additional fabric insert
- Mix one bag of gräfix 72 FL with approx. 8.5 litres of water
- Plaster thickness: work in several layers over 20 mm
- Yield: with 10 mm plaster thickness approx. 110 m² per tonne
