Light lime plaster
gräfix 71 lite
Lime-based lightweight plaster
CS I - mineral - with perlite
Diffusion-open lime base render for interior and exterior use with crushed limestone sand, processing additives, hydrated lime and a small addition of cement as a binder. A very low-stress hardening base plaster with a feltable surface. levelling plaster on gräfix 70 thermal insulation plaster.
Delivery: 30 kg bag
Loose goods in site silo
Grain size: 0 - 1.6 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0 - 1.6 mm crushed limestone sand
- approx. 31 litres of fresh mortar
- approx. 1050 litres/to
- Processing time approx. 2 - 3 hours
- Delivery in 30 kg paper bag
- 40 bags per pallet/1.2 tonnes
- also available as gräfix 71 lite coarse, grain size 0 - 4.0 mm on advance order and only by the pallet
- Very economical lightweight lime base render
- Very open to diffusion and low tension
- Very good machinability due to processing-enhancing additives
- Can be used indoors and outdoors
- can also be applied ready to use - feltable
- alternatively textured as a trowel finish, washed plaster etc.
- Pre-wet the substrate/masonry accordingly
- gräfix 63 SB is required as a bonding agent for smooth substrates
- Mix one bag of gräfix 71 lite with approx. 12 - 13 litres of water
- Min. plaster thickness per layer 8 mm
- Max. Plaster thickness per layer 15 mm
- Yield: with 10 mm plaster thickness approx. 105 m² per tonne
