gräfix 608
Special window plaster
CR CS II - for beautifully shaped surfaces with a scratch plaster texture (grain on grain)
The water-repellent, resistant, mineral window plaster is very economical, easy to apply and weather-resistant - even against driving rain - without hindering water vapour diffusion from the inside to the outside. Lightfast colour pigmentation and different Jura grain sizes open up expressive design possibilities.
Suitable for ETICS.
Supplied in 25 kg bags
Grain sizes: 2 mm - 3 mm
Yield: 8.3 m² 6.3 m²
- Normal plaster mortar according to DIN EN 998-1
- Mortar group: CR CS II
- Disc plaster with scratch plaster character
- Grain size: 2.0 and 3.0 mm
- Supplied in 25 kg paper bag
- Processing time: approx. 2 hours
- Standard colour: white
- Suitable for ETICS
- Very calcareous, mineral plaster
- Attractive "grain to grain" surface texture
- Can be applied by hand and with a plastering machine
- Open to water vapour diffusion
- Water-repellent
- Indoors and outdoors
- for walls and ceilings
- Colouring with lightfast colour pigments
- Remove coatings that restrict adhesion
- Pre-wet the substrate/masonry accordingly
- Roughened, set base plasters serve as substrates
- Mix one bag of gräfix 608 with approx. 6.5 - 7 litres of water
- Stir well again after 10 minutes
- Apply with a steel trowel by hand or with a plastering machine to grain thickness without any build-up
- Structure: Grain to grain, rub with a grating board, plastic trowel or sponge rubber disc
- Yield: with 2.0 mm grain size approx. 8.3 m² per bag/25 kg with 3.0 mm grain size approx. 6.3 m² per bag/25 kg
- Observe technical data sheet!
Mineral finishing plasters
Texturising, mineral finishing coat with grain size
Mineral finishing plasters are used to design wall and ceiling surfaces. In addition to texturing grain sizes, UV-resistant mineral colour pigments are used in production.
Thin-layer finishing plasters are usually rubbed down to grain size.
Thick-layer finishing plasters, such as the classic scratch plaster, are applied more thickly and scratched back.
Please refer to the information sheet "Levelling coats on decorative plasters"
