gräfix 605
Felt and textured plaster
CR CS II - mineral plaster for any surface design
Hard-wearing, mineral interior and exterior plaster which, thanks to its composition of lime, cement and carefully dosed calcite grains, as well as mineral colour pigments, is ideal for felting and for designing versatile textured wall surfaces.
Delivery: 25 kg bag
Grain size: 0 - 1.2 mm
- Normal plaster mortar according to DIN EN 998-1
- Mortar group: CR CS II
- for free structuring or felting
- grain size 0 - 1.2 mm calcite grains
- Supplied in 25 kg paper bag
- Processing time: approx. 2 hours
- Standard colour: white
- Suitable for ETICS
- Yield: with 2 mm plaster thickness approx. 8.8 m² per bag/25 kg
- Very calcareous, mineral plaster
- Can be applied by hand and with a plastering machine
- For felting and free texturing
- open to water vapour diffusion
- water-repellent
- Indoors and outdoors
- for walls and ceilings
- Coloured with lightfast pigments
- Remove coatings that restrict adhesion
- Pre-wet the substrate/masonry accordingly
- Roughened, set base plasters serve as substrates
- Prime the plaster base with Rabolin 160; 617 or 689
- for gypsum plasterboard or substrates prone to staining, prime with Rabolin 165 Isogrund
- Mix one bag of gräfix 605 with approx. 7.5 litres of water
- Apply by hand or with a plastering machine and create a flat surface
- Structure: after hardening: washing, ploughing, trowel application, felting, etc.
- Yield: with 2 mm plaster thickness approx. 8.8 m² per bag/25 kg
Mineral finishing plasters
Texturising, mineral finishing coat with grain size
Mineral finishing plasters are used to design wall and ceiling surfaces. In addition to texturing grain sizes, UV-resistant mineral colour pigments are used in production.
Thin-layer finishing plasters are usually rubbed down to the grain size, whereas thick-layer finishing plasters, such as classic scratch plasters, are applied more thickly and scratched back.
Please refer to the information sheet "Levelling coats on decorative plasters"
