Cement plaster
gräfix 64 socket
Universal renovation plaster / plinth thin-layer plaster
CS III - Thin coat plaster/thin base coat plaster
Very good adhesion cement-based thin-layer plaster with limestone crushed sand and processing-enhancing additives. It is ideal for felted surfaces in the plinth area, also for external thermal insulation composite systems and for levelling and coating older plinth surfaces. The fibre-reinforced renovation plaster adheres very well to mineral and dispersion-bonded surfaces. A final protective coat is required.
Delivery: 25 kg bag
Grain size: 0 - 0.8 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0 - 0.8 mm crushed limestone sand
- approx. 21 litres of fresh mortar
- approx. 840 litres/to
- Processing time approx. 1.5 - 2 hours
- Delivery in 25 kg paper bag
- 48 bags per pallet/1.2 tonnes
- Very economical cementitious thin-layer render
- Ideal for reworking or coating plinth surfaces, also for ETICS facades
- Can be applied by hand or with a plastering machine
- Very good machinability thanks to processing-enhancing additives
- Can be used indoors and outdoors
- Good adhesion to mineral or dispersion-bound substrates
- Very attractive felt structure
- Remove coatings that restrict adhesion
- Roughen and clean old, dispersion-bound substrates (plaster or paint)
- Pre-wet the substrate/masonry accordingly
- Mix one bag of gräfix 64 plinth with approx. 7 litres of water
- Plaster thickness: 3 to 5 mm, depending on use
- Yield: with 4 mm plaster thickness approx. 210 m² per tonne, approx. 5.25 m² per bag
