Primer
RABOLIN 617
Silicate primer with grain size
white pigmented, mineral - water glass based
High-quality primer for priming silicate-bound finishing plasters (ready-mixed plasters and ready-mixed dry mortar). The primer with coordinated grain sizes creates a rough, non-slip and absorption-regulated substrate. The dried coat silicifies with the substrate, is particularly breathable and has a high water vapour permeability. Ideally suited for mineral substrates (e.g. lime-cement base and light plasters).
Coverage: approx. 150 - 200 ml are sufficient for 1 m²
Delivery: 5 litre bucket
10-litre bucket
15 litre bucket
- Coarse water glass-based primer with grain size
- for interior and exterior use
- for silicifiable substrates
- Primer for subsequent silicate plasters
- water-dilutable max. 5 %
- Colour: white
- Can be recoated: after 6 hours at the earliest
- Drying time: at least 24 hours
- Supplied in 5, 10 and 15 litre buckets
Requirement: approx. 150 to 200 ml/m²
Coverage: 15 litre bucket is sufficient for approx. 75 to 100 m²
- Remove coatings that restrict adhesion
- Fresh base coats must be at least 10 days old
- if an insulating primer is required, prime with Rabolin 155
- Stir Rabolin 617 very well
- Can be diluted with max. 5 % water
- Observe the technical data sheet!
