Primer
RABOLIN 613
Silicate primer without grain size
White pigmented primer
High-quality primer based on water glass for priming mineral and other non-siliceous substrates. Can also be used as a primer for silicate-bound finishing plasters on rough and non-slip substrates. The dried coat silicifies with the substrate, is particularly breathable and has a high water vapour permeability.
RABOLIN 613 is used as a primer for RABOLIN 614 and RABOLIN 615 Silicate Facade and Interior Wall Paint.
Coverage: 10-litre bucket is sufficient for approx. 40 - 100 m²
Delivery: 5-litre bucket
10-litre bucket
- Fine water glass-based primer without grit
- for interior and exterior use
- for silicifiable substrates
- Primer for subsequent silicate paints
- Primer for subsequent silicate plasters with sufficiently coarse/gritty substrate
- water-dilutable max. 5 %
- Colour: white
- Can be recoated: after 6 hours at the earliest
- Drying time: at least 24 hours
- Supplied in 5 and 10 litre buckets
Requirement: approx. 100 to 250 ml/m²
Coverage: 10 litre bucket is sufficient for approx. 40 to 100 m²
- Remove coatings that restrict adhesion
- Fresh base coats must be at least 10 days old
- if an insulating primer is required, prime with Rabolin 155
- Stir Rabolin 613 well
- Can be diluted with max. 5 % water
- Drying time: at least 6 hours, depending on weather conditions
- Observe the technical data sheet!
