RABOLIN 130
Deep penetrating primer LF
White, solvent-free special primer for sanding or absorbent substrates
Capillary-active, with good penetration properties, for consolidating sanding plasters based on lime, cement or gypsum as well as cement screeds. It also increases the load-bearing capacity of subsequent layers. Tiefgrund LF is used indoors and outdoors for priming absorbent, mineral substrates. Also suitable for subsequent tile or natural stone bonding and as a primer for thin and medium-bed adhesives and as a primer for bonded waterproofing.
Delivery: 5 litre canister
10 litre canister
For consolidating and regulating the absorption behaviour of lime, cement and gypsum plasters and cement screeds.
- For interior and exterior use
- white, milky
- water-dilutable
- solvent-free
- Supplied in 5 and 10 litre canisters
- Remove coatings that restrict adhesion
- Stir Rabolin 130 briefly
- Can be diluted with water up to 1:3 (see TM)
- Apply primer generously by brushing, rolling or spraying
- Can be recoated: after 6 hours at the earliest
- Consumption depends on the absorption behaviour of the substrate
- Observe the technical data sheet!
Requirement: approx. 50 to 150 ml/m² per coat/depending on the degree of dilution (see TM)
