Primer
RABOLIN 132
LWF Primer – ready to use
A milky, solvent-free and plasticiser-free special primer for highly absorbent substrates
Capillary-active, with good penetration, for regulating absorbency; suitable for lime- and cement-based plasters as well as cement screeds. It also enhances the load-bearing capacity of subsequent layers. Tiefgrund LWF is used indoors and outdoors to prime absorbent, mineral-based substrates. It is also suitable for the subsequent bonding of tiles or natural stone, as a burn-on barrier for thin-bed and medium-bed adhesives, and as a primer for composite waterproofing systems.
Supplied in: 10-litre canisters
For regulating the water absorption behaviour of lime and cement plasters and cement screeds.
- For indoor and outdoor use
- milky
- ready to use
- solvent-free
- Plasticiser-free in accordance with VdL-RL01
- Very low emissions – EMICODE EC1 PLUS
- complies with the strictest limit values
- Supplied in a 10-litre canister
- Remove coatings that limit adhesion
- Stir Rabolin 132 briefly
- Apply the primer generously and undiluted using a brush, roller or spray gun
- Recoatable: after 6 hours at the earliest
- Coverage depends on the absorbency of the substrate
- Refer to the technical data sheet!
Coverage: 150 ml/m² per coat (see technical data sheet)
- Technical Data Sheet ► (DE) - (EN)
- Safety Data Sheet ► (DE)
- EMICODE Certificate ► (DE) - (EN)
- Brochure: ‘Installation Products for Natural Stone and Ceramics’
- Consumption calculator “Mortar & Monodrän”
