Lime-gypsum plaster
gräfix 14 m felt
Lime-gypsum machine plaster for felting
CS II
Single-layer felt plaster for interior walls and ceilings on all normal substrates. For smooth surfaces, RABOLIN 170 Betonkontakt is required as a bonding bridge. Highly absorbent surfaces (aerated concrete, vertically perforated bricks, etc.) should be pre-treated with RABOLIN 140 Aufbrennsperre.
In damp rooms (bathrooms, showers, cellars) gräfix 62 or gräfix 72 should be used instead of gräfix 14m.
Delivery: 30 kg bag
Loose goods in site silo
Grain size: 0 - 0.8 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0 - 0.8 mm crushed limestone sand
- approx. 30 litres of fresh mortar
- approx. 1000 litres/to
- Delivery in 30 kg paper bag
- 40 bags per pallet/1.2 tonnes
- Very economical lime-gypsum machine plaster
- Very good machinability due to processing-enhancing additives
- Elastic and breathable interior plaster
- Harmonised compressive and flexural tensile strength
- Remove coatings that restrict adhesion
- Pre-wet the substrate/masonry accordingly
- Priming with RABOLIN 170 is required for smooth surfaces
- Pre-treat highly absorbent and unevenly absorbent surfaces with RABOLIN 140 Aufbrennsperre
- Mix one bag of gräfix 14 m smoothing compound with approx. 14 litres of water
- Plaster thickness: 7 to 20 mm, depending on use
- Yield: with 10 mm plaster thickness approx. 100 m² per tonne
