Lightweight plaster for skirting boards
gräfix 72 base
Mineral plinth render
CS III
The ready-mixed plaster with water-repellent, adhesion and workability-enhancing additives mixed with water produces a particularly light, breathable base plaster with a low modulus of elasticity. The lightweight base coat plaster can be used for plastering a wide variety of masonry both indoors and outdoors. Thanks to its special composition and harmonised strength development, it is particularly suitable for use in the plinth area of lightweight masonry. Crack-free plaster surfaces are achieved on soft substrates, which would not be possible with plasters of mortar group P III.
Delivery: 30 kg bag
Loose goods in site silo
Grain size: 0 - 2.0 mm
- Normal plaster mortar according to DIN EN 998-1
- grain size 0-1.6 mm crushed limestone sand
- approx. 31 litres of fresh mortar
- approx. 1050 litres/to
- Processing time approx. 2-3 hours
- Delivery in 30 kg paper bag
- 40 bags per pallet/1.2 tonnes
- Very economical lime-cement lightweight base render for the plinth area
- Particularly light with low modulus of elasticity
- Can be applied by hand and with a plastering machine
- Very good machinability thanks to processing-enhancing additives
- Remove coatings that restrict adhesion
- Pre-wet the substrate/masonry accordingly
- gräfix 63 SB is required as a bonding agent for smooth substrates
- Mix one bag of gräfix 72 Sockel with approx. 10 litres of water
- Plaster thickness: over 20 mm, apply in several layers
- Yield: with 10 mm plaster thickness approx. 105 m² per tonne
