Primer
RABOLIN 140
Burn-on barrier
Special primer with organic binders without solvents, for levelling highly or differently absorbent substrates, for light substrate consolidation with regulated water absorption capacity to prevent the plaster from drying out quickly (burning).
Yield: 1 bucket is sufficient for approx. 50 - 100 m²
Delivery: 15 litre bucket
Primer for regulating the absorption behaviour of lime-cement, cement and gypsum plasters.
- Substrates: Aerated concrete, mixed masonry, lightweight bricks
- For interior and exterior use
- Yellow coloured
- water-dilutable
- Supplied in a 15 litre bucket
- Remove coatings that restrict adhesion
- Stir Rabolin 140 briefly
- Can be diluted with water up to max. 1:2
- Apply primer generously by brushing, rolling or spraying
- Can be recoated: after 6 hours at the earliest
- Consumption depends on the absorption behaviour of the substrate
- Observe the technical data sheet!
Requirement: approx. 130 to 300 ml/m² per coat/undiluted
15 litre container is sufficient for approx. 50 to 100 m²
